Hotplate/Griddle/Char-Broiler Combination, counter model, gas, 60" wide x 28" deep frame, (2) 24,000 BTU cast iron star pattern hotplate burners, (1) 24" x 21" x 3/4" thick griddle plate, (1) 24" x 21" cooktop broil area, cast iron char-broiler grates
CONSTRUCTION: Easy cleaning, corrosion resistant stainless steel
ﬁnish, welded with angle iron and aluminized inner framing. Sturdy 4˝
heavy duty stainless pipe legs with adjustable feet. Stainless steel bullnoserail
is functional on which to set plates or utensils and also serves as
control protection. Double wall construction with heavy insulation for
cooler operation. Installation clearances for non-combustible surfaces
are 0˝ on the sides and 4˝ in the rear. Char-broilers are approved for
use in non-combustible locations only.
CONTROLS: Equipped with brass gas valves and automatic standing
pilots. Pressure regulators are set at the factory for the gas speciﬁed.
Optimal pressures are 4˝ WC for natural gas and 10˝ WC for propane.
Manifold size is ¾˝ NPT. All controls are tested and conﬁrmed in good
working order. Calibration and adjustments are the responsibility of the
BURNERS: 12˝ incremental griddle & char-broiler models feature cast
iron “H” pattern burners, one for each 12˝ increment; griddles are
rated at 20,000 BTU ea. & char-broilers at 25,000 ea. Optional 35,000
BTU “H” char-broiler burners available. 18˝ and 30˝ griddle & charbroiler
sections feature 2 and 4 straight burners respectively; griddles
are rated at 18,000 BTU ea. & char-broilers at 20,000 ea. Open burners
are cast iron without gaskets, rated at 24,000 BTU’s and feature a large
7˝ “star” ﬂame pattern.
OPEN TOP GRATES: Open burner grates are 12˝ x 12˝ solid cast
iron with spillover bowl that also reﬂects heat to the cooking surface
for added efﬁciency and designed for easy movement of pots across
GRIDDLE PLATE: Highly polished to minimize food sticking. ¾˝ thick
plate is standard, 1˝ thick is available. 4˝ high splash guard is standard.
Higher sides are also available. 21¼˝ deep cooking surface with front
cold zone grease trough. Grease drain slot is 3.5˝ x 1˝ and feeds into a
seamless, deep, removable grease drawer.